PZA - Produktbild

Assembly Straight Edges of Steel

Assembly Straight Edges normal width No. 34

Assembly Straight Edges Type "S" extra wide No. 34/S

P. Zimlich - Assembly Straight Edges (also called Mounting Straight Edges, Levelling Beams or Assembling Straight Edges) and Templates are the best base for engineers` levels (spirit levels). Made from structural steel, I-section, with holes for lower weight, they bring the following advantages for mounting purposes:

  • low deflection 
  • high rigidity
  • very handy 

All straightedges with marked supporting points on one side face. Working faces and side faces fine ground.

The mentioned tolerances of DIN 874 Part 1 are only valid for the working faces. 

New: Assembly Straight Edges of Aluminium available in two cross-sections!

Assembly Straight Edges No. 34
Assembly Straight Edges No. 34

No. 34/0 - Accuracy of working faces according to DIN 874/0

No. 34/1 - Accuracy of working faces according to DIN 874/1

Assembly Straight Edges No. 34

Assembly Straight Edges of Steel No. 34/S
Assembly Straight Edges of Steel No. 34/S

made from I-profiled Steel, "large Profile", wider testing faces, lowest deflection, design else as No. 34
No. 34 S/0 - Accuracy of working faces acc. DIN 874/0
No. 34 S/1 - Accuracy of working faces acc. DIN 874/1

Assembly Straight Edges of Steel No. 34/S

On inquiry:

- Lengths up to 7500 m

- Tolerance Class 00 DIN 874 Part 1

- tooling in pairs and sets

- tolerated dimensions

- chemical-nickel-plated: Hardness 575 HV Layer thickness 20 µm

- stainless, antimagnetic in Mat. 1.4301/AISI 304

Cross sections available: In steps according to sizes of DIN 1025!